Underwater Acoustic Measurement

ZETLAB Hydrophones

Professional hydrophone solutions for underwater sound measurement, hydro-acoustic research, pressure monitoring, cavitation analysis and acoustic testing across different operating environments.

Enquire About Hydrophones →
Product Range

Hydrophones for Underwater Sound and Pressure Measurement

Explore four hydrophone models designed for different measurement requirements. The product range includes spherical compact hydrophones, dynamic pressure transducers and a digital hydrophone with integrated sensing and measurement functionality.

01

BC 311 Hydrophone

A robust spherical compact hydrophone for absolute measurements of sound propagation in an actuating medium.

02

BC 312 Hydrophone

A dynamic pressure transducer for sound and pressure measurement in homogeneous media, including air and water.

03

BC 313 Hydrophone

A dynamic pressure transducer with integrated amplification, balanced output and support for long cable connections.

04

BC 314-M Hydrophone

A digital hydrophone with an integrated sensing element and pre-installed measurement parameters.

Hydrophone Model 01

BC 311 Hydrophone

The BC 311 is a robust spherical compact hydrophone designed for absolute measurements of sound spreading in an actuating medium.

The hydrophone offers directional characteristics across its geometry, with an angular range of 270° in the X-Z plane and 360° in the X-Y plane.

BC 311 can operate as a sound projector and can also measure sound spreading in liquids. It can be used during reciprocity calibration.

Its piezoelectric sensing element has a reversible effect: mechanical stimulation generates an electrical signal, while an alternating voltage applied to the sensing element produces mechanical oscillations.

  • Spherical compact design
  • Omnidirectional characteristics
  • Sound measurement in liquids
  • Sound projector functionality
  • Reciprocity calibration
  • Piezoelectric sensing element
BC 311 Hydrophone
BC 311 Hydrophone
BC 311 Specifications

Technical Specifications

Parameter Underwater Version Threaded Version
LabellingBC 311
VersionUnderwaterThreaded
Nominal Voltage Sensitivity65 µV/Pa39 µV/Pa
Nominal Charge Sensitivity0.44 pC/Pa0.3 pC/Pa
Sensitivity Level (relative to 1V/µPa)-204 dB
Frequency Band3 to 100,000 Hz
Maximum Measured Sound Pressure Range100 kPa
Maximum Measured Attenuating Sound Pressure RangeUp to 10 MPa
Limit Static Line Pressure60 MPa
Capacity Exclusive of CableMinimum 6 nF
Explosion-Proof Version—Upon request
Casing MaterialStainless steel
Dimensions (Length × Casing Diameter)173 × Ø23 mm171 × Ø23 mm
Coupling Thread—M20 × 1.5
Cable Standard Length10 m2 m
Maximum Cable Length250 m
Cable TypeCoaxial, PVC coating, central wire, shielded, resistant to environment with sulfuric acid
Cable ConnectionBNC
Measurement Operating MediumWater, air, oil and oil products, natural gas
Operating Medium Temperature0 to +60 °C
Environment Air Temperature-60 to +80 °C
BC 311 Measurement

Measurement Capabilities

Sound Spreading in Water

Measurement of sound propagation in water.

Ultrasonic in Liquid Medium

Measurement of ultrasonic signals in liquid environments.

Noise in Wet and Polluted Media

Measurement of noise in wet and polluted media.

Liquid and Gas Medium

Sound measurement in liquid and gas environments in laboratory and factory settings.

BC 311 Applications

Applications

  • As a calibration standard
  • As a sound projector
  • Marine mammal sound measurement
  • Cavitation processes
Product Gallery

BC 311 Hydrophone Gallery

BC 312 Hydrophone
BC 312 Hydrophone
Hydrophone Model 02

BC 312 Hydrophone

BC 312 hydrophones are dynamic pressure transducers with an even response curve throughout the observed frequency range in homogeneous media, including air, sea water and fresh water.

They are used to determine explosion pressure in a range up to 1,000 kPa, with pulse duration of 2–5 ms and time sensitivity of approximately 0.1 ms.

BC 312 is also used in hydro-acoustics for reading underwater signals and noise, measurement purposes and as a component of beamed receiver hydroacoustic antennas.

Versions can be supplied without an integrated amplifier. In this configuration, the hydrophone can be used as a sonar transmitter.

BC 312 Specifications

Technical Specifications

ParameterUnderwater VersionThreaded Version
DesignationBC 312
VersionUnderwaterThreaded
Nominal Sensitivity200 µV/Pa150 µV/Pa
Sensitivity Level (relative to 1V/µPa)-192 dB-194 dB
Frequency Band20 to 20,000 Hz
Self-Noise, RMS*0.02 Pa
Maximum Measured Sound Pressure Range50 kPa
Limit Static Line Pressure60 mPa
Output Direct Voltage Level10 to 13 V
PowerIEPE (DeltaTron / ISOTRON)
Supply Voltage+(18 to 30) V
Supply Current3 mA
Explosion-Proof Version—Upon request
Casing MaterialStainless steel
Dimensions (Length × Casing Diameter)173 × Ø23 mm171 × Ø23 mm
Coupling Thread—M20 × 1.5
Cable Standard Length10 m2 m
Maximum Cable Length100 m
Cable Outer Diameter10.2 mm
Cable TypeCoaxial, PVC coating, central wire, screened, resistant to environment containing sulfuric acid
Cable PlugBNC
Measurement Operating EnvironmentWater, air, oil and oil products, natural gas
Operating Environment Temperature0 to +60 °C
Environment Air Temperature-60 to +80 °C

Source specification note: The BC 312 source lists the limit static line pressure as 60 mPa. This unit is reproduced exactly as supplied and should be confirmed with the manufacturer before technical use. The asterisk on self-noise is retained from the source.

Product Gallery

BC 312 Hydrophone Gallery

Hydrophone Model 03

BC 313 Hydrophone

The BC 313 is a dynamic pressure transducer with an even response curve throughout the complete frequency range observed in homogeneous media, including air, sea water and fresh water.

It is intended for hydro-acoustic applications, including measuring sound pressure levels in liquid media and observing cavitation processes.

The hydrophone uses a piezoceramic element as its signal transducer. Its integrated amplifier enables signal transmission through long submarine cables, including down to 1,000 m ocean depth as stated in the supplied product information.

Internal nodes are electrically insulated from the metal casing. Signal interference protection supports operation in water reservoirs with differing electrical potential and in environments with high electromagnetic fields.

  • Balanced output hydrophone
  • Heavy interference environments
  • Extra-long cable support
  • Ocean earthquake detection
  • Sea shelf seismic studies
  • Integrated amplifier
BC 313 Hydrophone
BC 313 Hydrophone
BC 313 Specifications

Technical Specifications

ParameterUnderwater VersionThreaded Version
DesignationBC 313
VersionUnderwaterThreaded
Nominal Sensitivity*50 µV/Pa
500 µV/Pa
5,000 µV/Pa
Sensitivity Level* (relative to 1V/µPa)-206 dB
-186 dB
-166 dB
Frequency Band20 to 20,000 Hz
Maximum Measured Sound Pressure Range* (as per nominal sensitivity)50 kPa
10 kPa
1 kPa
Limit Static Line Pressure4 MPa7 MPa
Self-Noise** (as per nominal sensitivity)0.2 Pa
0.1 Pa
0.01 Pa
Supply Voltage (Bipolar)±10 to ±15 V
Current Consumption20 to 30 mA
Explosion-Proof Version—Upon request
Casing MaterialStainless steel
Dimensions (Length × Casing Diameter)173 × Ø23 mm171 × Ø23 mm
Coupling Thread—M20 × 1.5
Cable Standard Length10 m2 m
Maximum Cable Length1,000 m
Cable Outer Diameter6 mm
Cable TypeCoaxial with PVC coating, central wire, screened, resistant to environment containing sulfuric acid
Cable ConnectionEnd-piece with wires
Measurement Operating EnvironmentWater, air, oil and oil products, natural gas
Operating Environment Temperature0 to +60 °C
Environment Air Temperature-60 to +80 °C

Configuration and ordering notes: * Nominal sensitivity and related parameters are determined when placing an order. The default is 500 µV/Pa; 50 µV/Pa or 5,000 µV/Pa can be specified for special orders. ** Self-noise is referred to output in the frequency band from 10 Hz to the upper band limit.

Product Gallery

BC 313 Hydrophone Gallery

BC 314-M Digital Hydrophone
BC 314-M Digital Hydrophone
Hydrophone Model 04

BC 314-M Digital Hydrophone

The BC 314-M is a digital hydrophone with an integrated sensing element. Measurements can begin immediately after switching on because the measurement process does not require measurement-channel adjustments.

Essential measurement parameters are pre-installed in the gauge memory.

The digital transducer output contains measured pressure values, so additional processing of the results is not required according to the supplied product description.

  • Integrated sensing element
  • Pre-installed measurement parameters
  • Immediate measurement operation
  • Digital pressure-value output
  • CAN 2.0 data interface
  • PTP synchronization
BC 314-M Specifications

Technical Specifications

ParameterSpecification
Parameter GaugedInstant values, RMS, peak Pa, kPa
Measuring Range100 kPa
Self-Noise, RMS*0.1 Pa
Frequency Band20 to 3,200 Hz
Type of Transducers ConnectedIntegrated piezo transducer
Tolerance Limit of Sound Pressure Range Gauging10%
Limit Measured Dynamic Pressure50 kPa
Limit Hydrostatic Pressure7 MPa
Data Output Frequency12,000; 8,000; 4,000; 2,000; 1,000; 500 Hz
For non-instantaneous values: 10 Hz
Data InterfaceCAN 2.0
Device Power9 to 24
Current Consumption at 12 VUp to 50 mA
Reading Frequency ResponseAvailable (diagnostics)
Sensing Element Integrity CheckAvailable (diagnostics)
Power CheckAvailable (diagnostics)
SynchronizationPrecision Time Protocol (PTP)
Casing MaterialStainless steel
Dimensions (Length × Casing Diameter)171 × Ø23 mm
Coupling ThreadM20 × 1.5
Cable Length2 m (standard)
Measurement Operating EnvironmentWater, air, oil and oil products, natural gas
Operating Environment Temperature0 to +60 °C
Environment Air Temperature-60 to +80 °C

Specification notes: * Self-noise is referred to output in the frequency band from 10 Hz to the upper band limit. The source lists device power as "9 to 24" without a unit; this has been retained without assuming a voltage unit.

Product Gallery

BC 314-M Hydrophone Gallery

Get In Touch

Looking for the Right Hydrophone?

Contact Flamboyant Solutions to discuss BC 311, BC 312, BC 313 and BC 314-M hydrophones for underwater acoustic measurements, pressure monitoring and hydro-acoustic applications.

Contact Our Team →