24/7 Wireless Condition Monitoring

DSP Compact Wireless Remote Monitor

An eight-channel remote monitoring system designed to analyse and control machinery condition through vibration measurements and additional process variables.

View Technical Specifications ↓
Product Overview

Continuous Monitoring for Critical Machinery

DSP Compact Wireless Remote Monitor (WRM) is an eight-channel unit used to analyse and control machinery condition caused by vibrations and other variables.

It is a 24/7 monitoring device that communicates through the commonly used 802.11b/g industrial wireless network.

Each of its eight channels can measure acceleration, velocity, displacement and envelope. It also has two AC channels and two channels dedicated to measuring temperature or any input that conforms to 4–20 mA.

Data can be stored in the WRM memory or transmitted to host-machine analysis and follow-up software. The software includes an alarm system that activates digital alerts or relays and provides continuous warnings on the host PC screen.

DSP Compact Wireless Remote Monitor
8 Monitoring Channels
24/7 Continuous Monitoring
200 WRM Units Supported by Software
1,200+ Measurements Processed Simultaneously
Monitoring Capabilities

Monitor Multiple Machinery Parameters

The WRM system supports mechanical vibration measurements alongside additional process variables for remote machinery monitoring.

01

Vibration Monitoring

Measures acceleration, velocity, displacement and envelope across its monitoring channels.

02

Process Variables

Supports additional inputs such as temperature, pressure, RPM and other compatible process variables.

03

Wireless Communication

Communicates through an 802.11b/g Wi-Fi network, allowing use of existing wireless infrastructure.

04

Remote Data Access

Measurement data can be stored in the WRM memory or transmitted to host-machine analysis software.

05

Relay-Based Alerts

Relay outputs can activate alerts or kill switches when configured thresholds are exceeded.

06

Expandable Monitoring

The software can manage up to 200 WRM units and process more than 1,200 measurements simultaneously.

Ideal Applications

Remote Monitoring for Difficult-to-Access Machinery

DSP Compact WRM is suitable for critical and semi-critical machinery in plants, remote monitoring via the Internet and machinery that is difficult to access regularly.

It supports temporary imbalance detection, production-process condition monitoring, recurring failure follow-up and troubleshooting.

  • Critical and semi-critical machinery in plants
  • Remote monitoring and remote failure analysis
  • Temporary imbalance detection
  • Machine condition monitoring in production processes
  • Recurring failure follow-up and troubleshooting
  • Bearing failure detection
  • Cavitation and lubricant film performance follow-up
  • Machinery with poor maintenance due to difficult access
  • Long-term registration without a continuous connection
  • Field machinery visited by maintenance personnel weekly or monthly
System Benefits

Benefits of DSP Compact WRM

A flexible remote monitoring system designed to simplify installation, monitoring and machinery condition follow-up.

01

Quick Implementation

Quick implementation and start-up help reduce installation costs.

02

24/7 Monitoring

An additional system for predictive machinery condition monitoring with continuous operation.

03

Easy Relocation

The complete system can be relocated and re-installed easily.

04

Wi-Fi Connectivity

Wireless connection can reduce the need for additional network installations and use existing Wi-Fi infrastructure.

05

Flexible Installation

Suitable for moving machinery and equipment that is difficult to access.

06

Expandable System

Monitoring coverage can be expanded and hardware and software adapted to machinery or production control systems.

Industrial Applications

Monitoring Machinery in Motion

The system is designed to operate with machinery in motion, including mobile and transport-related equipment.

01

Mining Trucks

Remote machinery condition monitoring for equipment operating in mining environments.

02

Train Locomotives

Monitoring machinery and vibration conditions in railway locomotives.

03

Subway Cars

Remote condition monitoring for machinery installed in moving subway cars.

Technical Details

DSP Compact WRM Technical Parameters

Explore the full technical specifications, including inputs, signal processing, outputs, measurements, environmental protection and wireless communication.

Input Parameters

No. of Channels8
Input Signal10 V pk-pk, ICP Power 5 V
No. DC Channels4
Range5 VDC, 0–10 V and 4–20 mA with ballast resistor function
No. of Trigger Inputs1
Tacho ChannelYes
Signal TypeTTL or 5–24 V pulse, from 6 to 600,000 pulses per minute (0.1 to 10,000 Hz)

Signal Specifications

ADC Resolution16 bits
Effective Sampling Rate64 Hz to 102.4 kHz
Frequency Response0.5 Hz to 32 kHz
Block SizeUp to 32,768
Spectral LinesUp to 25,600
WindowingHanning or Flat Top

Output Parameters

CommunicationRS485, RS232
Relay SystemTwo independent NO-NC relays. Software configured to activate through an alarm system and channel, sensor and cable condition.
Power12 VDC maximum, 10 mA maximum

Measurement Capabilities

CA ChannelsAcceleration, Velocity, Displacement and Envelope. Orbital graphic channels.
DC ChannelsDC generic, 5 V, 4 to 20 mA and temperature.
Internal Clock Programmable MeasurementsSecond, minute, hour and day/month data acquisition intervals.
PLCYes

Mechanical & Environmental Parameters

ProtectionIP67, NEMA 4X
MaterialFiberglass reinforced polycarbonate
Weight1.8 kg
Operating Temperature-10°C to +60°C

Wireless Certifications

FCCPart 15, Class B
ETSIEN 300 328 v1.6.1 (2004-11); EN 301 489-17 V1.2.1 (2002-11)
Dangerous AreaClass I, Division 2, Groups A, B, C, D with external power
European CommunityCE and RoHS

Data Communication

NetworkEthernet 802.11b/g Wi-Fi
RoutingStatic IP or DHCP
EncryptionWEP, WPA, WPA2/PSK
ConnectorsRJ45 LAN connector and USB connector
Monitoring Software

DSP Machinery Control Software

Software designed to organise, visualise, configure and analyse remote measurements delivered by WRM remote monitoring equipment.

Remote Measurement Management

DSP Machinery Control Software for WRM is designed for the organisation and visualisation of remote measurements delivered by remote monitoring WRM equipment.

Measurement system thresholds, parameters and detailed analysis of results can be operated through the software. It is designed to organise, execute and save measurements performed using the WRM module.

Every measurement captured by the hardware can be viewed on the main screen. Configurable views include online trends, analogue or pie charts, bar charts, spectral charts, waveform charts and orbital diagrams.

DSP Compact WRM remote monitoring system

Configuration

Load equipment and control points. The system enables editing of point information, including selecting each bearing from a pre-loaded database of 29,000 bearings. Measurements captured by the hardware can be viewed on the main screen through configurable trend, pie, bar, spectral, waveform and orbital views.

Settings & Point Management

Once equipment and control points are configured, users can edit point information and select bearing data for each point. Views can be configured to display different equipment or measurement points, making machinery condition information visually available. Information can also be relayed to a smartphone.

Spectral Analysis

Spectral charts provide a detailed view of component features in vibration trends. The application also offers tools for automatic analysis to support faster and more user-friendly diagnosis.

Measurement Configuration

Standard and special measurements and measurement sampling can be defined, including measurements that are not configured as part of a regular monitoring routine. Point-control tools provide access to the variables needed to isolate potential equipment failures.

Diagnostic Functions

Tools for Analysis

A collection of measurement, frequency identification and spectrum analysis tools for machinery condition diagnosis.

Amplitude and frequency of a component
Highest peak locator
Harmonics locator
Bands locator
Frequencies of bearing failure
Harmonic frequencies of bearing failure
Configuration of tools and thresholds
Recording of spectrum as a JPG image file
Spectrum browsing based on dates
Alarm mask configuration based on historical spectra
Frequency and amplitude measurement unit converter
Automatic marker for characteristic failure frequencies
Automatic marker for gear frequencies
Automatic marker for belt frequencies
System Alerts

Configurable Alarm System

Once alarms are defined for each measurement, the system can activate different commands based on configured conditions.

These commands can include activating NO-NC dry-contact relays for alarm systems or automatically launching specific measurements when an alarm is triggered.

Alarm-Based Monitoring Functions

  • Activate NO-NC dry-contact relay outputs.
  • Launch specific measurements automatically when an alarm is triggered.
  • Modify sampling based on measurements already configured.
  • Reduce the clearance time between measurements when required.
  • Configure thresholds for monitored channels and variables.
  • View general vibration status from the control console.
  • Support detailed diagnosis using spectra, waveforms and analysis tools.
Product Enquiry

Looking for a Wireless Remote Monitoring Solution?

Contact Flamboyant Solutions to discuss DSP Compact WRM, remote machinery monitoring and your industrial condition monitoring requirements.

Enquire Now →