Sensors & Measurement Solutions

Cavitation Sensors

High-frequency cavitation sensors designed to monitor and analyse cavitation noise in hydraulic equipment. Identify changes in cavitation activity and support turbine condition assessment through vibration-acoustic measurements.

Enquire Now
High-Frequency Measurement 20–160 kHz Range Industrial Monitoring
Cavitation Monitoring

Monitor Cavitation Noise and Turbine Performance

Cavitation sensors are vibration-acoustic transducers used to monitor and analyse cavitation noise. They help assess erosion, understand how erosion rate changes with operating conditions, and identify changes or incidents during turbine operation.

In hydraulic turbines and other hydraulic systems, cavitation can produce local pressure fluctuations and noise. Monitoring these signals provides information that can support the assessment of cavitation activity and equipment condition.

The ZET 811 and ZET 812 sensors are designed for high-frequency dynamic pressure measurement. The ZET 811 uses a charge-output sensing element, while the ZET 812 includes integrated ICP electronics.

⌁

High-frequency sensing

Designed for cavitation-noise monitoring across a frequency range of 20 to 160 kHz.

Monitoring Capabilities

What Can Cavitation Monitoring Help Assess?

Cavitation measurements provide useful information for evaluating turbine operating conditions and tracking changes over time.

01

Erosion Assessment

Support the assessment of erosion associated with cavitation activity.

02

Operating Condition Analysis

Study the relationship between erosion rate and equipment operating conditions.

03

Turbine Optimisation

Support improvements in turbine cavitation characteristics and operating performance.

04

Erosion Forecasting

Use monitored changes to support erosion prediction and maintenance planning.

05

Hydropower Applications

Support monitoring and optimisation activities in turbines and hydroelectric power plants.

06

Change Detection

Track changes in cavitation noise and identify unusual operating incidents.

Available Models

ZET Cavitation Sensor Range

Choose the sensor configuration that suits your measurement and signal-conditioning requirements.

Charge Output

ZET 811 Cavitation Sensor

The ZET 811 is an embedded-mount dynamic pressure sensor for monitoring cavitation noise. It uses a piezoelectric sensing element and provides a nominal charge sensitivity of 1000 pC/bar.

  • Embedded mounting design
  • Charge-output sensing element
  • Frequency range from 20 to 160 kHz
  • Stainless steel housing
  • BNC cable connection
Integrated ICP Electronics

ZET 812 Cavitation Sensor

The ZET 812 is an embedded-mount cavitation sensor with integrated ICP electronics. It provides a voltage-output signal and is designed for high-frequency cavitation-noise measurements.

  • Embedded mounting design
  • Integrated ICP electronics
  • Nominal sensitivity of 8500 mV/bar
  • Frequency range from 20 to 160 kHz
  • Powered through an ICP supply
Technical Data

ZET 811 Technical Specifications

Published technical parameters for the ZET 811 cavitation sensor.

ParameterSpecification
Type of executionEmbedded / flush mounting
Nominal sensitivity1000 pC/bar
Frequency range20 to 160 kHz
Resonant frequencyGreater than 100 kHz
Housing materialStainless steel
Dimensions (length × housing diameter)171 × Ø23 mm
Connection threadM20 × 1.5
Cable typeCoaxial, PVC jacket, central conductor and shield; resistant to environments containing sulfuric acid
Cable connectorBNC
Standard cable length2 m
Maximum cable length10 m
Measurement mediaWater, air, oil and oil products, natural gas
Operating medium temperature0 to +60 °C
Ambient air temperature−60 to +80 °C
Manufacturer note: The ZET 811 operates only under positive gauge pressure.
Technical Data

ZET 812 Technical Specifications

Published technical parameters for the ZET 812 ICP cavitation sensor.

ParameterSpecification
Type of executionEmbedded / flush mounting
Nominal sensitivity8500 mV/bar
Frequency range20 to 160 kHz
Output constant voltage level10 to 13 V
Power supplyICP
Supply voltage+18 to +30 V
Supply current3 mA
The available published specification extract lists the ZET 812 sensitivity, frequency range and ICP electrical parameters. Additional mechanical and environmental values should be confirmed against the manufacturer's current datasheet before ordering.
Measurement Process

How Cavitation Sensor Measurement Works

A cavitation monitoring setup uses the sensor as the primary sensing element and a suitable measurement system to acquire and process the signal.

01

Sensor Installation

The sensor is installed in a prepared mounting location on the equipment being monitored, such as a turbine.

02

Signal Acquisition

The sensing element detects dynamic pressure variations associated with cavitation noise. A suitable measurement module conditions and acquires the signal.

03

Analysis and Monitoring

Acquired measurements can be analysed to follow cavitation-related changes and support equipment condition assessment.

Applications

Where Are Cavitation Sensors Used?

Cavitation sensors are particularly relevant to hydraulic equipment where cavitation noise and related erosion need to be monitored.

  • Hydraulic turbine cavitation monitoring
  • Hydroelectric power plants
  • Cavitation noise measurement
  • Turbine erosion assessment
  • Monitoring changes in operating conditions
  • Hydraulic system condition assessment
⌁

Hydraulic Equipment Monitoring

Use cavitation-noise measurements to support turbine monitoring and condition assessment.

Talk to Our Team

Need Help Selecting a Cavitation Sensor?

Contact Flamboyant Solutions to discuss your cavitation monitoring requirements, sensor configuration and measurement setup.

Contact Us Today