A capacitive acceleration meter designed for linear acceleration and position measurement, capable of measuring both variable and direct components of an acceleration signal.
Enquire About BC 201 →The BC 201 acceleration meters are capacitive acceleration meters that can be used as linear acceleration and position sensors.
Unlike sensors that measure only the variable component of an acceleration signal, the BC 201 measures both the variable and direct components.
When installed on a sloped surface, the acceleration meter also allows measurement of radial acceleration.
The BC 201 combines capacitive measurement with a compact stainless-steel body and integrated cable connection.
Uses capacitive acceleration measurement technology to capture acceleration signal components.
Can be used as a linear acceleration sensor for measuring acceleration.
Supports position sensing through measurement of the direct component of acceleration.
Measures the direct component as well as the variable component of the acceleration signal.
When installed on a sloped surface, the meter allows radial acceleration measurement.
Features a stainless-steel body with an integrated two-metre cable and M5 pin mounting.
Refer to the technical parameters below for the BC 201 acceleration meter.
| Parameter | Specification |
|---|---|
| Sensitivity | 500 mV/g |
| Frequency Band | Up to 500 Hz |
| Relative Transverse Sensitivity | ≤5% |
| Amplitude Range | ±2.3 g |
| Internal Noise, RMS | <0.004 g |
| Measured Vibration Acceleration Values Range | 0.01 to 1 g |
| Three-Wire Connection Circuit | Ground, output signal, power supply |
| Power Supply Voltage | 5 V |
| Level of Direct Voltage at Output (Horizontal Position at 0 g) | 1.8 V |
| Consumed Current | 5 mA |
| Output Resistance | ≤500 Ohm |
| Body Material | Stainless Steel |
| Supplied Accessories | Pin |
| Mounting | On M5 Pin |
| Cable (Standard Length) | Integrated, 2 m |
| Weight | 16 g |
Connection information: The source specifies a three-wire connection consisting of ground, output signal and power supply. The stated power supply voltage is 5 V.
Contact Flamboyant Solutions for more information about BC 201 capacitive acceleration meters and their suitability for your measurement application.
Contact Our Team →