Motor Condition Monitoring

Test-I go MCSA

A battery-operated motor and generator testing instrument designed for condition monitoring while equipment is in operation. Combine electrical motor analysis and six-channel mechanical vibration analysis on one platform.

Enquire About Test-I go →
Product Overview

Advanced Motor Current Signature Analysis

SEMAPI's dynamic electric motor test and monitoring instruments are designed to conduct condition monitoring tests of motors and generators directly from the Motor Control Centre (MCC).

The Test-I go is a battery-operated instrument that tests motors and generators while they are running. Its Motor Current Signature Analysis (MCSA) capabilities support predictive maintenance by identifying potential power circuit problems and evaluating overall motor operating conditions.

It helps maintenance professionals monitor load, observe motor performance, assess energy efficiency and identify potential issues before they contribute to unexpected downtime.

  • Motor and generator monitoring
  • Electrical condition assessment
  • Power quality monitoring
  • Mechanical vibration analysis
  • Load and performance evaluation
  • Predictive maintenance support
Test-I go MCSA motor testing instrument
Test-I go MCSA Instrument
Monitoring Parameters

What Does Test-I go Measure?

The instrument provides information about electrical supply conditions, motor performance and operating characteristics. These measurements help maintenance teams assess the condition of individual motors and generators.

V

Three-Phase Voltage

Monitor three-phase voltage levels and identify voltage balance or unbalance conditions.

∿

Harmonics & Distortion

Evaluate harmonic components and total distortion in the electrical supply.

M

Rotor Cage Condition

Assess rotor cage condition as part of motor current signature analysis.

%

Motor Efficiency

Evaluate motor efficiency and effective service factor to understand operating performance.

A

Current & Power Factor

Monitor current and power factor correction conditions within the motor system.

↗

Torque & Load

Observe motor torque and load to better understand how the machine is operating.

One Integrated Platform

Electrical and Mechanical Analysis Together

Test-I go combines motor electrical testing with mechanical vibration analysis, helping maintenance teams investigate problems without necessarily purchasing two separate testers.

⚡

Electrical Motor Analysis

Assess the electrical conditions that influence motor health and performance. The instrument evaluates the quality of power supplied to the motor and tracks motor performance indicators.

  • Three-phase voltage levels
  • Voltage balance and unbalance
  • Harmonic and total distortion
  • Rotor cage condition
  • Motor efficiency and service factor
  • Current, power factor, torque and load
〰

Six-Channel Vibration Analysis

The platform also supports sophisticated six-channel mechanical vibration analysis. This allows users to assess mechanical conditions alongside electrical motor measurements.

  • Mechanical vibration assessment
  • Six-channel vibration analysis capability
  • Electrical and mechanical troubleshooting
  • Integrated predictive maintenance approach
  • Single platform for multiple testing needs
Test Data & Reporting

Save, Recall and Track Motor Test Results

Once testing is complete, results can be saved and stored for each individual electric motor. The source describes a typical test duration of approximately 30 seconds.

Stored results provide documentation for predictive maintenance programmes and allow maintenance professionals to recall previous information and track changes over time.

Test results can be collected, stored, recalled and managed using common database file formats. The information also helps operators assess energy efficiency and understand the cost implications of energy consumption.

Test-I go MCSA testing and monitoring
Motor testing and result monitoring
Troubleshooting & Maintenance

Identify Electrical and Mechanical Root Causes

Motor problems can lead to disagreements about whether the cause is electrical or mechanical. Test-I go helps maintenance teams investigate both sides of the machine system to identify where problems originate.

01

Identify Problems

Detect potential electrical or mechanical issues affecting motor and machine health.

02

Investigate Root Causes

Evaluate power conditions and mechanical vibration to help determine the source of a problem.

03

Track Performance

Store and recall motor test results to identify trends that may indicate developing problems.

Important: Not an Insulation Tester

Test-I go is not a motor insulation tester. It uses software algorithms to monitor conditions across a motor and machine system that influence motor health and performance. It evaluates power quality, motor performance indicators and the load placed on the motor.

Power Quality Monitoring

Detect Power Quality Issues That Affect Motor Life

Distortion, imbalances or improper electrical supply levels can place unnecessary stress on motors and shorten their service life. Test-I go monitors power, voltage and current levels, imbalances and harmonic distortion to help identify potential power quality problems.

Potential Problems Identified

  • Improper tap settings on supply transformers
  • Poorly distributed single-phase loads
  • Excessive number of VFDs without proper filtration
  • Excessive non-Delta timing transitions
  • Cavitation in pumps
  • Motor overload
  • Missing or open power-factor correction capacitors
  • High-resistance connections
✓

Support Corrective Decisions

The instrument can also provide written confirmation of existing problems that maintenance professionals may already suspect but need additional evidence to address.

This information supports troubleshooting and helps teams investigate electrical supply conditions that may be affecting motor operation.

By documenting measurements and tracking results over time, maintenance teams can build a clearer picture of motor condition and performance.

Product Gallery

Test-I go MCSA Gallery

Explore the Test-I go instrument and its motor testing applications through the product images below.

Get In Touch

Looking for an Integrated Motor Testing Solution?

Contact Flamboyant Solutions to learn more about Test-I go MCSA and how electrical and mechanical motor condition monitoring can support your predictive maintenance programme.

Contact Our Team →